Editando: mariadbd-safe
#!/usr/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # # Script to start the MySQL daemon and restart it if it dies unexpectedly # # This should be executed in the MySQL base directory if you are using a # binary installation that is not installed in its compile-time default # location # # mysql.server works by first doing a cd to the base directory and from there # executing mysqld_safe # Initialize script globals KILL_MYSQLD=1; MYSQLD= niceness=0 nowatch=0 mysqld_ld_preload= mysqld_ld_library_path= flush_caches=0 numa_interleave=0 wsrep_on=0 dry_run=0 defaults_group_suffix= # Initial logging status: error log is not open, and not using syslog logging=init want_syslog=0 syslog_tag= user='mysql' group='mysql' pid_file= err_log= err_log_base= skip_err_log=0 syslog_tag_mysqld=mysqld syslog_tag_mysqld_safe=mysqld_safe trap '' 1 2 3 15 # we shouldn't let anyone kill us case "$0" in *mysqld_safe) echo "$0: Deprecated program name. It will be removed in a future release, use 'mariadbd-safe' instead" 1>&2 ;; esac # MySQL-specific environment variable. First off, it's not really a umask, # it's the desired mode. Second, it follows umask(2), not umask(3) in that # octal needs to be explicit. Our shell might be a proper sh without printf, # multiple-base arithmetic, and binary arithmetic, so this will get ugly. # We reject decimal values to keep things at least half-sane. umask 007 # fallback UMASK="${UMASK-0640}" fmode=`echo "$UMASK" | sed -e 's/[^0246]//g'` octalp=`echo "$fmode"|cut -c1` fmlen=`echo "$fmode"|wc -c|sed -e 's/ //g'` if [ "x$octalp" != "x0" -o "x$UMASK" != "x$fmode" -o "x$fmlen" != "x5" ] then fmode=0640 echo "UMASK must be a 3-digit mode with an additional leading 0 to indicate octal." >&2 echo "The first digit will be corrected to 6, the others may be 0, 2, 4, or 6." >&2 fi fmode=`echo "$fmode"|cut -c3-4` fmode="6$fmode" if [ "x$UMASK" != "x0$fmode" ] then echo "UMASK corrected from $UMASK to 0$fmode ..." fi defaults= case "$1" in --no-defaults|--defaults-file=*|--defaults-extra-file=*) defaults="$1"; shift ;; esac usage () { cat <<EOF Usage: $0 [OPTIONS] --no-defaults Don't read the system defaults file --defaults-file=FILE Use the specified defaults file --defaults-extra-file=FILE Also use defaults from the specified file --defaults-group-suffix=X Additionally read default groups with X appended as a suffix --ledir=DIRECTORY Look for mysqld in the specified directory --open-files-limit=LIMIT Limit the number of open files --crash-script=FILE Script to call when mysqld crashes --core-file-size=LIMIT Limit core files to the specified size --timezone=TZ Set the system timezone --malloc-lib=LIB Preload shared library LIB if available --mysqld=FILE Use the specified file as mysqld --mysqld-version=VERSION Use "mysqld-VERSION" as mysqld --dry-run Simulate the start to detect errors but don't start --nice=NICE Set the scheduling priority of mysqld --no-auto-restart Exit after starting mysqld --nowatch Exit after starting mysqld --plugin-dir=DIR Plugins are under DIR or DIR/VERSION, if VERSION is given --skip-kill-mysqld Don't try to kill stray mysqld processes --syslog Log messages to syslog with 'logger' --skip-syslog Log messages to error log (default) --syslog-tag=TAG Pass -t "mysqld-TAG" to 'logger' --flush-caches Flush and purge buffers/caches before starting the server --numa-interleave Run mysqld with its memory interleaved on all NUMA nodes All other options are passed to the mysqld program. EOF exit 1 } find_in_bin() { if test -x "$MY_BASEDIR_VERSION/bin/$1" then echo "$MY_BASEDIR_VERSION/bin/$1" elif test -x "/usr/bin/$1" then echo "/usr/bin/$1" else echo "$1" fi } log_generic () { [ $dry_run -eq 1 ] && return priority="$1" shift msg="`date +'%y%m%d %H:%M:%S'` mysqld_safe $*" echo "$msg" case $logging in init) ;; # Just echo the message, don't save it anywhere file) if [ "$helper_exist" -eq "0" ]; then echo "$msg" | "$helper" "$user" log "$err_log" fi ;; syslog) logger -t "$syslog_tag_mysqld_safe" -p "$priority" "$*" ;; *) echo "Internal program error (non-fatal):" \ " unknown logging method '$logging'" >&2 ;; esac } log_error () { log_generic daemon.error "$@" >&2 } log_notice () { log_generic daemon.notice "$@" } eval_log_error () { local cmd="$1" case $logging in file) if [ "$helper_exist" -eq "0" ]; then cmd="$cmd 2>&1 | "`shell_quote_string "$helper"`" $user log "`shell_quote_string "$err_log"` fi ;; syslog) # mysqld often prefixes its messages with a timestamp, which is # redundant when logging to syslog (which adds its own timestamp) # However, we don't strip the timestamp with sed here, because # sed buffers output (only GNU sed supports a -u (unbuffered) option) # which means that messages may not get sent to syslog until the # mysqld process quits. cmd="$cmd 2>&1 | logger -t '$syslog_tag_mysqld' -p daemon.error" ;; *) echo "Internal program error (non-fatal):" \ " unknown logging method '$logging'" >&2 ;; esac if test $nowatch -eq 1 then # We'd prefer to exec $cmd here, but SELinux needs to be fixed first #/usr/bin/logger "Running mysqld: $cmd" eval "$cmd &" exit 0 else #echo "Running mysqld: [$cmd]" eval "$cmd" fi } shell_quote_string() { # This sed command makes sure that any special chars are quoted, # so the arg gets passed exactly to the server. echo "$1" | sed -e 's,\([^a-zA-Z0-9/_.=-]\),\\\1,g' } wsrep_pick_url() { [ $# -eq 0 ] && return 0 log_error "WSREP: 'wsrep_urls' is DEPRECATED! Use wsrep_cluster_address to specify multiple addresses instead." if ! command -v nc >/dev/null then log_error "ERROR: nc tool not found in PATH! Make sure you have it installed." return 1 fi local url # Assuming URL in the form scheme://host:port # If host and port are not NULL, the liveness of URL is assumed to be tested # If port part is absent, the url is returned literally and unconditionally # If every URL has port but none is reachable, nothing is returned for url in `echo $@ | sed s/,/\ /g` 0; do local host=`echo $url | cut -d \: -f 2 | sed s/^\\\/\\\///` local port=`echo $url | cut -d \: -f 3` [ -z "$port" ] && break nc -z "$host" $port >/dev/null && break done if [ "$url" == "0" ]; then log_error "ERROR: none of the URLs in '$@' is reachable." return 1 fi echo $url } # Run mysqld with --wsrep-recover and parse recovered position from log. # Position will be stored in wsrep_start_position_opt global. wsrep_start_position_opt="" wsrep_recover_position() { local mysqld_cmd="$@" local euid=$(id -u) local ret=0 local wr_logfile=$(mktemp /tmp/wsrep_recovery.XXXXXX) # safety checks if [ -z $wr_logfile ]; then log_error "WSREP: mktemp failed" return 1 fi if [ -f $wr_logfile ]; then # NOTE! Do not change ownership of the temporary file, as on newer kernel # versions fs.protected_regular is set to '2' and redirecting output with > # as root to a file not owned by root will fail with "Permission denied" chmod 600 $wr_logfile else log_error "WSREP: mktemp failed" return 1 fi local wr_pidfile="$DATADIR/"`uname -n`"-recover.pid" local wr_options="--disable-log-error --pid-file='$wr_pidfile'" log_notice "WSREP: Running position recovery with $wr_options" eval "$mysqld_cmd --wsrep_recover $wr_options 2> $wr_logfile" if [ ! -s "$wr_logfile" ]; then log_error "Log file $wr_logfile was empty, cannot proceed. Is system running fs.protected_regular?" exit 1 fi local rp="$(grep -a 'WSREP: Recovered position:' $wr_logfile)" if [ -z "$rp" ]; then local skipped="$(grep -a WSREP $wr_logfile | grep 'skipping position recovery')" if [ -z "$skipped" ]; then log_error "WSREP: Failed to recover position: '`cat $wr_logfile`'" ret=1 else log_notice "WSREP: Position recovery skipped" fi else local start_pos="$(echo $rp | sed 's/.*WSREP\:\ Recovered\ position://' \ | sed 's/^[ \t]*//')" log_notice "WSREP: Recovered position $start_pos" wsrep_start_position_opt="--wsrep_start_position=$start_pos" fi if [ $ret -eq 0 ] ; then local wr_logfile_permanent="$DATADIR/wsrep_recovery.ok" else local wr_logfile_permanent="$DATADIR/wsrep_recovery.fail" fi touch $wr_logfile_permanent [ "$euid" = "0" ] && chown $user $wr_logfile_permanent chmod 600 $wr_logfile_permanent cat "$wr_logfile" >> $wr_logfile_permanent rm -f "$wr_logfile" return $ret } parse_arguments() { for arg do val=`echo "$arg" | sed -e "s;--[^=]*=;;"` case "$arg" in # these get passed explicitly to mysqld --basedir=*) MY_BASEDIR_VERSION="$val" ;; --datadir=*|--data=*) DATADIR="$val" ;; --pid[-_]file=*) pid_file="$val" ;; --plugin[-_]dir=*) PLUGIN_DIR="$val" ;; --user=*) user="$val"; SET_USER=1 ;; --group=*) group="$val"; SET_USER=1 ;; --log[-_]basename=*|--hostname=*|--loose[-_]log[-_]basename=*) pid_file="$val.pid"; err_log_base="$val"; ;; # these might have been set in a [mysqld_safe] section of my.cnf # they are added to mysqld command line to override settings from my.cnf --skip[-_]log[-_]error) err_log=; skip_err_log=1; ;; --log[-_]error=*) err_log="$val"; skip_err_log=0; ;; --port=*) mysql_tcp_port="$val" ;; --socket=*) mysql_unix_port="$val" ;; # mysqld_safe-specific options - must be set in my.cnf ([mysqld_safe])! --core[-_]file[-_]size=*) core_file_size="$val" ;; --ledir=*) ledir="$val" ;; --malloc[-_]lib=*) set_malloc_lib "$val" ;; --crash[-_]script=*) crash_script="$val" ;; --mysqld=*) MYSQLD="$val" ;; --mysqld[-_]version=*) if test -n "$val" then MYSQLD="mysqld-$val" PLUGIN_VARIANT="/$val" else MYSQLD="mysqld" fi ;; --dry[-_]run) dry_run=1 ;; --nice=*) niceness="$val" ;; --nowatch|--no[-_]watch|--no[-_]auto[-_]restart) nowatch=1 ;; --open[-_]files[-_]limit=*) open_files="$val" ;; --skip[-_]kill[-_]mysqld*) KILL_MYSQLD=0 ;; --syslog) want_syslog=1 ;; --skip[-_]syslog) want_syslog=0 ;; --syslog[-_]tag=*) syslog_tag="$val" ;; --timezone=*) TZ="$val"; export TZ; ;; --flush[-_]caches) flush_caches=1 ;; --numa[-_]interleave) numa_interleave=1 ;; --wsrep[-_]on) wsrep_on=1 append_arg_to_args "$arg" ;; --skip[-_]wsrep[-_]on) wsrep_on=0 append_arg_to_args "$arg" ;; --wsrep[-_]on=*) if echo $val | grep -iq '\(ON\|1\)'; then wsrep_on=1 else wsrep_on=0 fi append_arg_to_args "$arg" ;; --wsrep[-_]urls=*) wsrep_urls="$val"; ;; --wsrep[-_]provider=*) if test -n "$val" && test "$val" != "none" then wsrep_restart=1 fi append_arg_to_args "$arg" ;; --defaults-group-suffix=*) defaults_group_suffix="$arg" ;; --help) usage ;; *) case "$unrecognized_handling" in collect) append_arg_to_args "$arg" ;; complain) log_error "unknown option '$arg'" ;; esac esac done } # Add a single shared library to the list of libraries which will be added to # LD_PRELOAD for mysqld # # Since LD_PRELOAD is a space-separated value (for historical reasons), if a # shared lib's path contains spaces, that path will be prepended to # LD_LIBRARY_PATH and stripped from the lib value. add_mysqld_ld_preload() { lib_to_add="$1" log_notice "Adding '$lib_to_add' to LD_PRELOAD for mysqld" case "$lib_to_add" in *' '*) # Must strip path from lib, and add it to LD_LIBRARY_PATH lib_file=`basename "$lib_to_add"` case "$lib_file" in *' '*) # The lib file itself has a space in its name, and can't # be used in LD_PRELOAD log_error "library name '$lib_to_add' contains spaces and can not be used with LD_PRELOAD" exit 1 ;; esac lib_path=`dirname "$lib_to_add"` lib_to_add="$lib_file" [ -n "$mysqld_ld_library_path" ] && mysqld_ld_library_path="$mysqld_ld_library_path:" mysqld_ld_library_path="$mysqld_ld_library_path$lib_path" ;; esac # LD_PRELOAD is a space-separated [ -n "$mysqld_ld_preload" ] && mysqld_ld_preload="$mysqld_ld_preload " mysqld_ld_preload="${mysqld_ld_preload}$lib_to_add" } # Returns LD_PRELOAD (and LD_LIBRARY_PATH, if needed) text, quoted to be # suitable for use in the eval that calls mysqld. # # All values in mysqld_ld_preload are prepended to LD_PRELOAD. mysqld_ld_preload_text() { text= if [ -n "$mysqld_ld_preload" ]; then new_text="$mysqld_ld_preload" [ -n "$LD_PRELOAD" ] && new_text="$new_text $LD_PRELOAD" text="${text}LD_PRELOAD="`shell_quote_string "$new_text"`' ' fi if [ -n "$mysqld_ld_library_path" ]; then new_text="$mysqld_ld_library_path" [ -n "$LD_LIBRARY_PATH" ] && new_text="$new_text:$LD_LIBRARY_PATH" text="${text}LD_LIBRARY_PATH="`shell_quote_string "$new_text"`' ' fi echo "$text" } # set_malloc_lib LIB # - If LIB is empty, do nothing and return # - If LIB starts with 'tcmalloc' or 'jemalloc', look for the shared library # using `ldconfig`. # tcmalloc is part of the Google perftools project. # - If LIB is an absolute path, assume it is a malloc shared library # # Put LIB in mysqld_ld_preload, which will be added to LD_PRELOAD when # running mysqld. See ld.so for details. set_malloc_lib() { malloc_lib="$1" if expr "$malloc_lib" : "\(tcmalloc\|jemalloc\)" > /dev/null ; then export PATH=$PATH:/sbin if ! command -v ldconfig > /dev/null 2>&1 then log_error "ldconfig command not found, required for ldconfig -p" exit 1 fi # format from ldconfig: # "libjemalloc.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libjemalloc.so.1" libmalloc_path="$(ldconfig -p | sed -n "/lib${malloc_lib}/p" | cut -d '>' -f2)" if [ -z "$libmalloc_path" ]; then log_error "no shared library for lib$malloc_lib.so.[0-9] found." exit 1 fi for f in $libmalloc_path; do if [ -f "$f" ]; then malloc_lib=$f # get the first path if many break fi done fi # Allow --malloc-lib='' to override other settings [ -z "$malloc_lib" ] && return case "$malloc_lib" in /*) if [ ! -r "$malloc_lib" ]; then log_error "--malloc-lib '$malloc_lib' can not be read and will not be used" exit 1 fi ;; *) log_error "--malloc-lib must be an absolute path, 'tcmalloc' or " \ "'jemalloc'; ignoring value '$malloc_lib'" exit 1 ;; esac add_mysqld_ld_preload "$malloc_lib" } # # First, try to find BASEDIR and ledir (where mysqld is) # MY_PWD=`dirname $0` MY_PWD=`cd "$MY_PWD"/.. && pwd` # Check for the directories we would expect from a binary release install if test -n "$MY_BASEDIR_VERSION" -a -d "$MY_BASEDIR_VERSION" then # BASEDIR is already overridden on command line. Do not re-set. # Use BASEDIR to discover le. if test -x "$MY_BASEDIR_VERSION/libexec/mariadbd" then ledir="$MY_BASEDIR_VERSION/libexec" elif test -x "$MY_BASEDIR_VERSION/sbin/mariadbd" then ledir="$MY_BASEDIR_VERSION/sbin" else ledir="$MY_BASEDIR_VERSION/bin" fi elif test -x "$MY_PWD/bin/mariadbd" then MY_BASEDIR_VERSION="$MY_PWD" # Where bin, share and data are ledir="$MY_PWD/bin" # Where mysqld is # Check for the directories we would expect from a source install elif test -x "$MY_PWD/libexec/mariadbd" then MY_BASEDIR_VERSION="$MY_PWD" # Where libexec, share and var are ledir="$MY_PWD/libexec" # Where mysqld is elif test -x "$MY_PWD/sbin/mariadbd" then MY_BASEDIR_VERSION="$MY_PWD" # Where sbin, share and var are ledir="$MY_PWD/sbin" # Where mysqld is # Since we didn't find anything, used the compiled-in defaults else MY_BASEDIR_VERSION='/usr' ledir='/usr/sbin' fi helper=`find_in_bin mariadbd-safe-helper` print_defaults=`find_in_bin my_print_defaults` # Check if helper exists command -v $helper --help >/dev/null 2>&1 helper_exist=$? # # Second, try to find the data directory # # Try where the binary installs put it if test -d $MY_BASEDIR_VERSION/data/mysql then DATADIR=$MY_BASEDIR_VERSION/data # Next try where the source installs put it elif test -d $MY_BASEDIR_VERSION/var/mysql then DATADIR=$MY_BASEDIR_VERSION/var # Or just give up and use our compiled-in default else DATADIR=/var/lib/mysql fi if test -z "$MYSQL_HOME" then if test -r "$DATADIR/my.cnf" then log_error "WARNING: Found $DATADIR/my.cnf The data directory is not a valid location for my.cnf, please move it to $MY_BASEDIR_VERSION/my.cnf" fi MYSQL_HOME=$MY_BASEDIR_VERSION fi export MYSQL_HOME append_arg_to_args () { args="$args "`shell_quote_string "$1"` } args= # Get first arguments from the my.cnf file, groups [mysqld] and [server] # (and related) and then merge with the command line arguments SET_USER=2 parse_arguments `$print_defaults $defaults --loose-verbose --mysqld` if test $SET_USER -eq 2 then SET_USER=0 fi # If arguments come from [mysqld_safe] section of my.cnf # we complain about unrecognized options unrecognized_handling=complain parse_arguments `$print_defaults $defaults --loose-verbose mysqld_safe safe_mysqld mariadb_safe mariadbd_safe mariadbd-safe` # We only need to pass arguments through to the server if we don't # handle them here. So, we collect unrecognized options (passed on # the command line) into the args variable. unrecognized_handling=collect parse_arguments "$@" # # Try to find the plugin directory # # Use user-supplied argument if [ -n "${PLUGIN_DIR}" ]; then plugin_dir="${PLUGIN_DIR}" else # Try to find plugin dir relative to basedir for dir in lib64/mysql/plugin lib64/plugin lib/mysql/plugin lib/plugin do if [ -d "${MY_BASEDIR_VERSION}/${dir}" ]; then plugin_dir="${MY_BASEDIR_VERSION}/${dir}" break fi done # Give up and use compiled-in default if [ -z "${plugin_dir}" ]; then plugin_dir='/usr/lib64/mysql/plugin' fi fi plugin_dir="${plugin_dir}${PLUGIN_VARIANT}" # Determine what logging facility to use # Ensure that 'logger' exists, if it's requested if [ $want_syslog -eq 1 ] then if ! command -v logger > /dev/null then log_error "--syslog requested, but no 'logger' program found. Please ensure that 'logger' is in your PATH, or do not specify the --syslog option to mysqld_safe." exit 1 fi fi if [ $skip_err_log -eq 1 ] then append_arg_to_args "--skip-log-error" fi if [ -n "$err_log" -o $want_syslog -eq 0 ] then if [ -n "$err_log" ] then # mysqld adds ".err" if there is no extension on the --log-error # argument; must match that here, or mysqld_safe will write to a # different log file than mysqld # mysqld does not add ".err" to "--log-error=foo."; it considers a # trailing "." as an extension if expr "$err_log" : '.*\.[^/]*$' > /dev/null then : else err_log="$err_log".err fi case "$err_log" in /* ) ;; * ) err_log="$DATADIR/$err_log" ;; esac else if [ -n "$err_log_base" ] then err_log=$err_log_base.err case "$err_log" in /* ) ;; * ) err_log="$DATADIR/$err_log" ;; esac else err_log=$DATADIR/`uname -n`.err fi fi append_arg_to_args "--log-error=$err_log" if [ $want_syslog -eq 1 ] then # User explicitly asked for syslog, so warn that it isn't used log_error "Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect." want_syslog=0 fi # Log to err_log file log_notice "Logging to '$err_log'." logging=file else if [ -n "$syslog_tag" ] then # Sanitize the syslog tag syslog_tag=`echo "$syslog_tag" | sed -e 's/[^a-zA-Z0-9_-]/_/g'` syslog_tag_mysqld_safe="${syslog_tag_mysqld_safe}-$syslog_tag" syslog_tag_mysqld="${syslog_tag_mysqld}-$syslog_tag" fi log_notice "Logging to syslog." logging=syslog fi USER_OPTION="" if test -w / -o "$USER" = "root" then if test "$user" != "root" -o $SET_USER = 1 then USER_OPTION="--user=$user" # To be used if/when we enable --system-group as an option to mysqld GROUP_OPTION="--group=$group" fi if test -n "$open_files" then ulimit -n $open_files fi fi if test -n "$open_files" then append_arg_to_args "--open-files-limit=$open_files" fi safe_mysql_unix_port=${mysql_unix_port:-${MYSQL_UNIX_PORT:-/var/lib/mysql/mysql.sock}} # Make sure that directory for $safe_mysql_unix_port exists mysql_unix_port_dir=`dirname $safe_mysql_unix_port` if [ ! -d $mysql_unix_port_dir -a $dry_run -eq 0 ] then if ! mkdir -p $mysql_unix_port_dir then log_error "Fatal error Can't create database directory '$mysql_unix_port'" exit 1 fi if [ "$user" -a "$group" ]; then chown $user:$group $mysql_unix_port_dir else [ "$user" ] && chown $user $mysql_unix_port_dir [ "$group" ] && chgrp $group $mysql_unix_port_dir fi chmod 755 $mysql_unix_port_dir fi # If the user doesn't specify a binary, we assume name "mariadbd" if test -z "$MYSQLD" then MYSQLD=mariadbd fi if test ! -x "$ledir/$MYSQLD" then log_error "The file $ledir/$MYSQLD does not exist or is not executable. Please cd to the mysql installation directory and restart this script from there as follows: ./bin/mysqld_safe& See https://mariadb.com/kb/en/mysqld_safe for more information" exit 1 fi if test -z "$pid_file" then pid_file="`uname -n`.pid" fi # MariaDB wants pid file without datadir append_arg_to_args "--pid-file=$pid_file" case "$pid_file" in /* ) ;; * ) pid_file="$DATADIR/$pid_file" ;; esac if test -n "$mysql_unix_port" then append_arg_to_args "--socket=$mysql_unix_port" fi if test -n "$mysql_tcp_port" then append_arg_to_args "--port=$mysql_tcp_port" fi if test $niceness -eq 0 then NOHUP_NICENESS="nohup" else NOHUP_NICENESS="nohup nice -$niceness" fi # Using nice with no args to get the niceness level is GNU-specific. # This check could be extended for other operating systems (e.g., # BSD could use "nohup sh -c 'ps -o nice -p $$' | tail -1"). # But, it also seems that GNU nohup is the only one which messes # with the priority, so this is okay. if nohup nice > /dev/null 2>&1 then normal_niceness=`nice` nohup_niceness=`nohup nice 2>/dev/null` numeric_nice_values=1 for val in $normal_niceness $nohup_niceness do case "$val" in -[0-9] | -[0-9][0-9] | -[0-9][0-9][0-9] | \ [0-9] | [0-9][0-9] | [0-9][0-9][0-9] ) ;; * ) numeric_nice_values=0 ;; esac done if test $numeric_nice_values -eq 1 then nice_value_diff=`expr $nohup_niceness - $normal_niceness` if test $? -eq 0 && test $nice_value_diff -gt 0 && \ nice --$nice_value_diff echo testing > /dev/null 2>&1 then # nohup increases the priority (bad), and we are permitted # to lower the priority with respect to the value the user # might have been given niceness=`expr $niceness - $nice_value_diff` NOHUP_NICENESS="nice -$niceness nohup" fi fi else if nohup echo testing > /dev/null 2>&1 then : else # nohup doesn't work on this system NOHUP_NICENESS="" fi fi # Try to set the core file size (even if we aren't root) because many systems # don't specify a hard limit on core file size. if test -n "$core_file_size" then ulimit -c $core_file_size fi # # If there exists an old pid file, check if the daemon is already running # Note: The switches to 'ps' may depend on your operating system if test -f "$pid_file" && [ $dry_run -eq 0 ] then PID=`cat "$pid_file"` if kill -0 $PID > /dev/null 2> /dev/null then if ps wwwp $PID | grep -v mariadbd-safe | grep -v mysqld_safe | grep -- $MYSQLD > /dev/null then # The pid contains a mysqld process log_error "A mysqld process already exists" exit 1 fi fi rm -f "$pid_file" if test -f "$pid_file" then log_error "Fatal error: Can't remove the pid file: $pid_file Please remove it manually and start $0 again; mysqld daemon not started" exit 1 fi fi # # Flush and purge buffers/caches. # if true && test $flush_caches -eq 1 then # Locate sync, ensure it exists. if ! command -v sync > /dev/null then log_error "sync command not found, required for --flush-caches" exit 1 # Flush file system buffers. elif ! sync then # Huh, the sync() function is always successful... log_error "sync failed, check if sync is properly installed" fi # Locate sysctl, ensure it exists. if ! command -v sysctl > /dev/null then log_error "sysctl command not found, required for --flush-caches" exit 1 # Purge page cache, dentries and inodes. elif ! sysctl -q -w vm.drop_caches=3 then log_error "sysctl failed, check the error message for details" exit 1 fi elif test $flush_caches -eq 1 then log_error "--flush-caches is not supported on this platform" exit 1 fi # # Uncomment the following lines if you want all tables to be automatically # checked and repaired during startup. You should add sensible key_buffer # and sort_buffer values to my.cnf to improve check performance or require # less disk space. # Alternatively, you can start mysqld with the "myisam-recover" option. See # the manual for details. # # echo "Checking tables in $DATADIR" # $MY_BASEDIR_VERSION/bin/myisamchk --silent --force --fast --medium-check $DATADIR/*/*.MYI # $MY_BASEDIR_VERSION/bin/isamchk --silent --force $DATADIR/*/*.ISM # Does this work on all systems? #if type ulimit | grep "shell builtin" > /dev/null #then # ulimit -n 256 > /dev/null 2>&1 # Fix for BSD and FreeBSD systems #fi cmd="`mysqld_ld_preload_text`$NOHUP_NICENESS" [ $dry_run -eq 1 ] && cmd='' # # Set mysqld's memory interleave policy. # if true && test $numa_interleave -eq 1 then # Locate numactl, ensure it exists. if ! command -v numactl > /dev/null then log_error "numactl command not found, required for --numa-interleave" exit 1 # Attempt to run a command, ensure it works. elif ! numactl --interleave=all true then log_error "numactl failed, check if numactl is properly installed" fi # Launch mysqld with numactl. [ $dry_run -eq 0 ] && cmd="$cmd numactl --interleave=all" elif test $numa_interleave -eq 1 then log_error "--numa-interleave is not supported on this platform" exit 1 fi for i in "$ledir/$MYSQLD" "$defaults_group_suffix" "$defaults" "--basedir=$MY_BASEDIR_VERSION" \ "--datadir=$DATADIR" "--plugin-dir=$plugin_dir" "$USER_OPTION" do cmd="$cmd "`shell_quote_string "$i"` done cmd="$cmd $args" if [ $dry_run -eq 1 ] then # RETURN or EXIT depending if the script is being sourced or not. (return 2> /dev/null) && return || exit fi # Avoid 'nohup: ignoring input' warning test -n "$NOHUP_NICENESS" && cmd="$cmd < /dev/null" log_notice "Starting $MYSQLD daemon with databases from $DATADIR" # variable to track the current number of "fast" (a.k.a. subsecond) restarts fast_restart=0 # maximum number of restarts before trottling kicks in max_fast_restarts=5 # flag whether a usable sleep command exists have_sleep=1 # close stdout and stderr, everything goes to $logging now if expr "${-}" : '.*x' > /dev/null then : else exec 1>/dev/null exec 2>/dev/null fi # maximum number of wsrep restarts max_wsrep_restarts=0 while true do rm -f "$pid_file" # Some extra safety start_time=`date +%M%S` # Perform wsrep position recovery if wsrep_on=1, skip otherwise. if test $wsrep_on -eq 1 then # this sets wsrep_start_position_opt wsrep_recover_position "$cmd" [ $? -ne 0 ] && exit 1 # [ -n "$wsrep_urls" ] && url=`wsrep_pick_url $wsrep_urls` # check connect address if [ -z "$url" ] then eval_log_error "$cmd $wsrep_start_position_opt" else eval_log_error "$cmd $wsrep_start_position_opt --wsrep_cluster_address=$url" fi else eval_log_error "$cmd" fi end_time=`date +%M%S` if test ! -f "$pid_file" # This is removed if normal shutdown then break fi # sanity check if time reading is sane and there's sleep if test $end_time -gt 0 -a $have_sleep -gt 0 then # throttle down the fast restarts if test $end_time -eq $start_time then fast_restart=`expr $fast_restart + 1` if test $fast_restart -ge $max_fast_restarts then log_notice "The server is respawning too fast. Sleeping for 1 second." sleep 1 sleep_state=$? if test $sleep_state -gt 0 then log_notice "The server is respawning too fast and no working sleep command. Turning off trottling." have_sleep=0 fi fast_restart=0 fi else fast_restart=0 fi fi if true && test $KILL_MYSQLD -eq 1 then # Test if one process was hanging. # This is only a fix for Linux (running as base 3 mysqld processes) # but should work for the rest of the servers. # The only thing is ps x => redhat 5 gives warnings when using ps -x. # kill -9 is used or the process won't react on the kill. numofproces=`ps xaww | grep -v "grep" | grep "$ledir/$MYSQLD\>" | grep -c "pid-file=$pid_file"` log_notice "Number of processes running now: $numofproces" I=1 while test "$I" -le "$numofproces" do PROC=`ps xaww | grep "$ledir/$MYSQLD\>" | grep -v "grep" | grep "pid-file=$pid_file" | sed -n '$p'` for T in $PROC do break done # echo "TEST $I - $T **" if kill -9 $T then log_error "$MYSQLD process hanging, pid $T - killed" else break fi I=`expr $I + 1` done fi if [ -n "$wsrep_restart" ] then if [ $wsrep_restart -le $max_wsrep_restarts ] then wsrep_restart=`expr $wsrep_restart + 1` log_notice "WSREP: sleeping 15 seconds before restart" sleep 15 else log_notice "WSREP: not restarting wsrep node automatically" break fi fi log_notice "mysqld restarted" if test -n "$crash_script" then crash_script_output=`$crash_script 2>&1` log_error "$crash_script_output" fi done log_notice "mysqld from pid file $pid_file ended"
Cancelar
Kerym Chaeceran